Filling Systems
IBCS offers filling systems from three manufacturers, more information on the systems and configurations can be found by following the appropriate link below
An Overview
Correct topping up of lead acid batteries is essential - too much water and the electrolyte will overflow, too little and the battery will quickly fail. To ensure that each cell is topped automatically to the correct level IBCS offer a centralised filling system called BFS.
BFS is a float system, the float in each cell operates a valve that shuts off the supply of water to the cell as the float rises. The system is universal, and compatible with that of many of other battery manufacturers. There is a level indicator in each cell plug, which indicates the electrolyte level, and the top flips open to allow access for a hydrometer.
Water Trolley
The carts supply water where you want it, when you want it. Just fill the tanks from the tap, from bottles, or from our available de-ionizer – and you are ready to go.
BFS
BFS is a float system, the float in each cell operates a valve that shuts off the supply of water to the cell as the float rises. The system is universal, and compatible with that of many of other battery manufacturers.
Watermaster
The Watermaster Battery Watering Vent Cap is the patented key component used to set up batteries to be watered efficiently. Designed for simplicity, water delivery to each cell is accomplished using the natural force of gravity and without the intervention of any moving parts to wear out or break.
Aquajet
Aquajet is a single point filling system that fills each cell to the required level. A battery can be filled with precise level control in less than 15 seconds. When the tip of the injector touches the electrolyte, the internal valve shuts off with an action 20 times stronger than a float valve.
Topping Accessories
Battery topping snd filling accessories. Filling Guns / De-ioniser Units / Pressure reducers etc